BC7069-2

BC7136

BC8001

BC8002

BC8009

BC8650

BC8660E

BC8990

BCC casting systems are designed for heavy wall casting of patterns, dies, mold duplications and prototypes, etc. These systems vary from heavy aluminum, iron oxide filled epoxy to lighter weight for backing filling molds. These systems have pot lives of 40 minutes to 3 hours depending on the system. And the aluminum filled system is made for high heat applications with resistance of 300 degrees.

Available Products:

BC 7069-2  - aluminum filled, epoxy mass casting resin. This room temperature cure system may be cast to a thickness of 4 inches in non-conductive molds and 5 inches in metal molds without foaming or yielding excessive shrinkage.

BC7136 - a gray, low toxicity, aluminum filled, epoxy casting resin. This heat resistant system may be used at room temperature without post-curing. This product was engineered to replace VCHD and MDA systems while retaining excellent heat resistance and low viscosity.

"New" BC8001 - advanced fast cast polyurethane tooling system. It features low viscosity, low exotherm and minimal shrinkage.  Designed for constructing patterns, prototypes, duplications, negatives, low temperature vacuum form tools, tracing models, etc.

"New" BC8002 Kwik Kast II is an enhanced fast cast polyurethane tooling system. It has been reinvented for greater moisture resistance and improved filler suspension for easier premixing of the components. BC8002 is designed for constructing patterns, prototypes, duplications, negatives, low temperature vacuum form tools, tracing models, etc.

"New" BC8009 Slo-Kast is a low viscosity, medium setting, easy to use casting material. This polyurethane system features extremely low shrinkage when properly cured. Slo-Kast is ideal for casting large sections without having to stage pour.

BC 8650 is an advanced fast cast polyurethane tooling system  featuring low viscosity, low exotherm and minimal shrinkage. Designed for constructing patterns, prototypes, duplications, negatives, low temperature vacuum form tools, tracing models, etc.

BC8660E is a multi-purpose elastomer that can perform many functions. Special product characteristics are: excellent use for molds for casting of concrete and plaster, resists moisture absorption, does not contain MOCA, MDA, TDI or MDI.

BC8990 is a two-component urethane elastomer compound specifically designed for general purpose molding and casting of various shapes. BC8990 may be used to provide abrasion resistant liners, pads and bumpers.

RETURN TO MOLD-MAKING MATERIALS