Corrugated Plastic Center Materials:
Alumalite® – corrugated plastic center with two finished aluminum sides
Econolite® – corrugated plastic center with one finished aluminum side
D-Lite™ – corrugated plastic center with economy grade aluminum sides
Alumalite® is a strong, aluminum composite panel with a high density, corrugated polyallomer (CPA) core that will not swell, wick water, corrode, rot, or delaminate due to prolonged water exposure. The surface is .016-inch high-gloss painted aluminum. Alumalite® is strong and lightweight. It’s the same weight as .040 aluminum sheet metal, tipping the scales at just 24 lbs. However, Alumalite® is over 50 times stronger for a 4' x 8' sheet.
Availability:
6mm x 4’ x 8’ double sided (12 colors)
6mm x 5’ x 8’ double sided (White only)
6mm x 5’ x 10’ double sided (White only)
10mm x 4’ x 8’ double sided (12 colors)
10mm x 5’ x 10’ double sided (White only)
Econolite® is an economical alternative to Alumalite®, but with only one painted aluminum side. The other side is a light gauge, aluminum backer.
Availability:
6mm x 4’ x 8’ one sided (12 colors)
10mm x 4’ x 8’ one sided (White only)
D-Lite™ is an economical alternative to Alumalite®, Dibond®, sheet metal and expanded PVC. The core is a high density, corrugated polyallomer (CPA), that will not swell, wick water, corrode, rot, or delaminate due to prolonged water exposure. The finished surface is a .012-inch high gloss white aluminum face on two sides or one sided with a colored light gauge aluminum backer.
Availability:
3mm x 4’ x 8’ double sided (12 colors)
3mm x 4’ x 10’ double sided (12 colors)